Indoor Cat Tree Ideas

Oct 6th

Cat Tree Ideas – Cats love to scratch, and if they do not have anything suitable to sharpen their nails, they will choose your wall or furniture instead. Fortunately, you can make your own cat tree covered by the carpet and sisal rope for your cats to claw, which will prove to be a saving grace for your home and interior.

Instructions

Cut a 4-times-4 post to 36 inches long. Measure 6 inches from one end. Use a drill and a 1 1/2 inch screw to attach one end of a 50 foot long sisal rope to service at the selected location. Wrap the rope around the post as hard as possible. After every ten wrap, use a hammer to tie the rope to keep the rows as close to each other as possible.  Cut a piece of the carpet to this measurement by 16 inches. Nail the carpet to the mail as you did with the first part of the carpet.

Related :   Design of Best Cat Tree

Cut a piece of plywood to 2 meters from 2 meters. Cut a piece of the carpet to 28 inches square. Lay the carpet upside down on a work surface, and place the wood on top of it. Wrap the carpet around the back of the wood, and nail it into place. This is your Cat Tree Ideas bass. Set the wood insert centered on top of the wood side of the base. Trace around the post. Mark four places for screws, one near each corner of the square you just traced.  Have a friend hold the mail up and down the ground. Hold the base over it so that the screws are against the bottom of the insert. Finish drill screws so that they hold the base to the post. Turn the Cat Tree Ideas right side up.